These technologies provide biodegradable bone implants and artificial bone matrices for bony tissue repair. They encompass: (1) a method for creating organoapatite...
These technologies provide biodegradable bone implants and artificial bone matrices for bony tissue repair. They encompass: (1) a method for creating organoapatite (artificial bone) matrices on surgical metal implants, as well as the matrix materials themselves, and (2) a biodegradable polymer matrix for use in bone tissue repair. Both types of material provide immediate tissue treatment or repair, while allowing and encouraging natural repair processes and cell growth to occur gradually. They degrade to biocompatible substances and/or naturally occurring metabolites.
These technologies encompass a biodegradable, synthetic polymer for use as a tissue repair matrix, as well as a novel preparatory method for depositing organoapatites onto surgical metal alloys used in implants. The organoapatite matrix materials are included, as well. Both of these types of matrices are designed to promote natural tissue repair processes, following implantation, and to degrade, in situ, to physiologically and biochemically compatible compounds.
Biodegradable Amphiphilic Polymer Matrix
This novel material is designed to have a lipophilic binding moiety covalently coupled to a hydrophilic tissue adhesion moiety via a divalent linker comprising either a natural metabolite or a polymer biodegradable into a metabolite. The preparation of these polymers, as well as their use in formulating implant matrices for tissue treatment and repair, is provided as well. Preferred polymers are prepared using a lipophilic alcohol or amine to initiate polymerization of one or more cyclic esters of hydroxyl acids. The resulting polyester is then covalently linked to a polyionic group, via one of several linker moieties. The composition of the matrices can vary from viscous liquid to molded solid, based on its chemical constituents and molecular weights. Specific, preferred matrices exhibit self-assembly, characteristic of liquid crystal compositions, and impart a unique matrix structure and function, with localized, ordered domains. Such domains possess temperature-dependent order, enabling liquid-solid transitions as a function of temperature (i.e., solidifying from a pre-implant liquid to a post-implant solid or liquid crystal). Polymers used in implant compositions degrade after implantation, providing a temporary template for cell growth and localized release of any contained bioactive additives. For tissue repair, the matrix is gradually replaced by endogenous tissue.
In addition to being biodegradable, this innovative technology provides a unique matrix structure with localized domains. This property, coupled with its unique molecular structure affords significant potential for making implants with highly improved functionality. In addition, the liquid crystal nature of these matrices enables temperature-dependent ordering, i.e., the ability to change from liquid to solid following a change in temperature from slightly above-normal to normal body temperatures. The implant matrix composition can be used alone or can also contain an effective amount of a bioactive adjuvant (or cells) for tissue treatment/repair. The natural surfactant action of these amphiphilic, biodegradable matrices serves a tissue wetting/adhesive function; this, along with the ordered molecular arrangement, enhances cell growth and tissue regeneration at the implant site.
Methodology for Deposition of Organoapatites onto Surgical Metal Alloys
Organoapatites can be created by a serial treatment process, wherein a porous metal implant (typically a metal alloy) is immersed in a solution of a charged poly(amine)(s), followed by immersion in a second solution of a second, charged poly(amine)(s), whose charge is opposite that of the first poly(amine) (i.e., poly(lysine) (+) followed by poly(glutamate) (-)). The second polyamine solution may be the poly(amine) alone or in combination with apatite-forming constituents. These steps allow an insoluble, polyionic organic complex to form on the alloy, which serves as a type of scaffold for the subsequent, stable precipitation of apatites onto the coated alloy. The apatite-synthesizing step involves a ratio- and rate-controlled addition of solutions of calcium hydroxide and phosphoric acid to the final poly(amine) solution containing the metal alloy. Organoapatite precipitation occurs onto the alloy within minutes to hours. Following precipitation, the coated alloy is removed, rinsed twice, and vacuum dried, prior to use.
Current methods aim to improve the rate of bone osseointegration in cementless systems, either by applying highly crystalline calcium phosphate to porous metal implants, or inserting bone allografts or reconstituted bone at the metal/bone interface. While inviting bone growth, the former method consists of a brittle, ceramic phase that is not fully resorbed and requires a high processing temperature that degrades the mechanical properties of the metal substrate. The latter methods, especially those using synthetic bone materials, are not sufficiently like natural bone in microstructure and/or composition, and bone growth rates are not effectively improved. This technology provides a method for growing fully (or at least partially) resorbable, synthetic bone on the surface of a porous metal implant that can be used to stimulate cellular activity and bone growth, with replacement (at least in part) by natural bone tissue.
Dr. Bashir has developed a walking biological machine. This "bio-bot" can move spontaneously, and may be useful for sensing, information processing, transport,...
Dr. Bashir has developed a walking biological machine. This "bio-bot" can move spontaneously, and may be useful for sensing, information processing, transport, protein expression and actuation applications.
Dr. Rashid Bashir has developed a process for manufacturing modular bioactuators. The process utilizes stereolithographic 3D printing to create injection...
Dr. Rashid Bashir has developed a process for manufacturing modular bioactuators. The process utilizes stereolithographic 3D printing to create injection molds for cell/hydrogel cultures and for skeletal scaffolds for the actuators. The resulting ring-like actuators can then be manually placed on the scaffold. This introduces a modular design that is customizable and transferable. These actuators are also triggered optogenetically and exhibit directional motion and 2D steering.
Professor Harley from the University of Illinois and his collaborators have developed a unique bioactive composite structure for use in the regenerative repair of...
Professor Harley from the University of Illinois and his collaborators have developed a unique bioactive composite structure for use in the regenerative repair of craniomaxillofacial bone injuries. This bioactive composite material is based on a 3D-printable foam which can be generated to fit complex shapes, features mechanical properties that can be tailored to match the physical properties of the bone at the surgical site, and can maintain their physical properties after being further shaped intraoperatively. When included within the bioactive composite structure this modular fiber mesh both passively aids surgical-practicality and actively accelerates regenerative healingreinforcement. More specifically, these bioactive composites supported human bone-marrow derived mesenchymal stemcell osteogenesis and new bone formation.Importantly, this bioactive composite does not suffer from the drawbacks of autologous bone or alloplastic implants, the current clinical gold standard for repair. Moreover, unlike current biomaterials this biomaterial composite has not demonstrated the release of any negative degradation by products, such as metal ions or acids.